HumanTechnik mona A-2576-0 Manual De Uso página 24

Video receiver display
A B
I
The figures show the regular display which appears when the receiver
is activated from standby mode.
A Battery charge status
B Indication during a call
C Battery status of door monitor (when used with batteries)
D Signal strength of monitor
E Zooming
F Rejecting a call
G The plug icon appears when the door monitor is powered by 12 V wire.
H Number of current monitor
I Function definition for left softkey
J Function definition for right softkey
Switching the video receiver on / off
Press and hold
video receiver off, press and hold
Please note that the switched-on receiver will automatically enter
stand-by mode after 20 seconds of the last key entry.
Press any key at any time to awaken the receiver from the stand-by
mode.
English 24
C D
J
until the video receiver switches on. To switch the
E F G
I
again.
H
J