HumanTechnik mona A-2576-0 Manual De Uso página 27

- To zoom in on the video feed, press and hold the Monitor key
The video conversation will automatically end after 2 minutes.
The internal video feed ends automatically after 5 minutes.
Unlock
If the door monitor has been installed accordingly with the electric door
lock, press the Unlock key
door.
Monitor night vision
The infrared LEDs of the monitors will automatically light the scene
when the ambient light becomes too dark.
This light is not visible to the person in front of the monitor.
Video receiver: Setting date and time
1. Press any key to switch the display on. Press the menu key
enter the main menu. With the navigation keys, select "Date &
Time". Press the right key
2. The hours cursor blinks. Adjust the hours with the Navigation keys
"" and "". With the right Navigation key "", select the minutes and
adjust with "" und "" .
3. Press "" again to enter the date setting. As described above,
use "" and "" to adjust the date.
4. Press "Save"
The time format is 24 h and the date format is YY-MM-DD. Date and
time should be set in order to correctly display the time of captured
images.
When replacing batteries or in case of a total discharge of the video
receiver's power pack, date and time must be set again.
Video receiver: Setting the transmission volume
The call volume can be adjusted in 9 levels.
- During a video transmission, press the Navigation keys "" and ""
to adjust the volume.
- If the receiver is in stand-by mode, press any key to switch the display
on. Press the menu key
during the conversation to open the
(Select) to enter the selection.
to save the settings and return to the previous menu.
to enter the main menu. With the
.
EN
to
English 27