Important Safety Information - Petsafe PPA19-16145 Guia De Inicio Rapido

Hereinafter Radio Systems Corporation, Radio Systems PetSafe Europe Ltd.,
Radio Systems Australia Pty Ltd. and any other affiliate or Brand of Radio
Systems Corporation may be referred to collectively as "We" or "Us".

IMPORTANT SAFETY INFORMATION

Explanation of Attention Words and Symbols used in this guide
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
WARNING indicates a hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol,
indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE is used to address practices not related to
personal injury.
When children are present in the home, it is important to consider the pet door during
child proofing activities, the pet door may be misused by a child resulting in the child
accessing potential hazards that may be on the other side of the pet door. Purchasers/
Homeowners with swimming pools should ensure that the pet door is monitored at all
times and that the swimming pool has adequate barriers to entry. If a new hazard is
created inside or outside of your home, which may be accessed through the pet door,
Radio Systems Corporation recommends that you properly guard access to the hazard
or remove the pet door. The closing panel or lock, if applicable, is provided for aesthetic
and energy efficiency purposes and is not intended as a security device. Radio Systems
Corporation will not be liable for unintended use and the purchaser of this product
accepts full responsibility for oversight of the opening it creates.
• Power Tools. Risk of severe injury; follow all safety instructions for your power tools.
• Be sure to always wear your safety goggles.
2
petsafe.com
The user, prior to installation, must become familiar with all building codes that may
affect the installation of the pet door and determine, along with a licensed contractor,
its suitability in a given installation. This pet door is not a fire door. It is important for the
owner and contractor to consider any risks that may be present inside or outside of the
pet door, and any risks that may be created by subsequent changes to your property and
how they may relate to the existence and use, including misuse of the pet door.
• If cutting a metal surface, be aware of sharp edges to prevent injury.
• Keep these instructions with important papers; be sure to transfer these instructions to
the new owner of the property.
• Please read these instructions fully prior to forming or modifying an opening in
your selected door or wall. We strongly recommend that your microchip cat flap is
programmed for your cat and a check made that it works with the microchip in your
cat first.
• This unit only operates properly when outside temperatures are greater than -25° C
and less than 55° C.
• PetSafe ® pet doors are suitable for most door, wall or partition although additional
materials may be required. This product is designed for the convenience of you and
your pet. It is not possible to fully guarantee the exclusion of all other animals in all
circumstances. Radio Systems Corporation will not accept liability for any damage
or inconvenience caused by unwanted animals who may gain access to your home.
In keeping with accepted standards of parental care, children should be supervised
at all times.
Thank you for choosing the PetSafe Brand. You and your pet deserve a
®
companionship that includes memorable moments and a shared understanding
together. Our products and training tools enhance the relationship between
pets and their owners. If you have any questions about our products
or training your pet, please visit our website at www.petsafe.com
or contact our Customer Care Centre. For a listing of Customer Care
Centre telephone numbers, visit our website at www.petsafe.com.
To get the most protection out of your warranty, please register your product
within 30 days at www.petsafe.com. By registering and keeping your receipt,
you will enjoy the product's full warranty and should you ever need to call the
Customer Care Centre, we will be able to help you faster. Most importantly,
your valuable information will never be given or sold to anyone. Complete
warranty information is available online at www.petsafe.com.
Programming Cats into the PetSafe
®
Microchip Cat Flap
Your PetSafe ® Microchip Cat Flap is designed to work with most 15-digit
microchips (FDX-B) used for pets. Before you begin setup or installation of the
cat flap, please ensure your cat has the correct type of microchip.
To begin operation, the cat flap must learn the unique microchip Identification
Number (ID) of your cat. Please follow the steps below to begin the setup of
your cat flap:
1. The cat flap will be factory pre-set in the locked position. Ensure the
manual lock is set to the In and Out position. (See Fig.H).
2. Remove the battery cover, set aside the provided hardware pack, and
install 4 alkaline AA batteries (LR6). The green LED light will flash three (3)
times which indicates that the cat flap is in Automatic Mode.
3. To enter Learn Mode, press and hold the button until the red LED light
appears (about 5 seconds). You will have 60 seconds to position the cat's
head in the tunnel to learn the microchip ID. Once the cat flap has learned
the microchip ID, it will unlatch and the red LED will turn off. The cat flap
will stay in Automatic Mode and will re-latch after 3 seconds.
Accessories available online
4. After successfully learning the cat's microchip ID, you will be ready to
install the cat flap into your door.
Note: To learn more than one cat, please follow the same steps starting with
step No. 3. The microchip cat flap can store up to 40 microchipped cats.
Replace the battery cover when the process is complete for all cats.
Helpful Tip: Program your cat's microchip ID
before installation to prevent having to hold your
cat in the cat flap once it is installed. If you are
having trouble programming your cat's
microchip ID, please ensure that their
head is extended into the tunnel or they
pass all the way through the cat flap. You
should hear the cat flap unlatch once it
has learned your cat's microchip ID.
3