Select Alarm Source; Being Awakened - ADE CK 1708 Manual De Operación

Select alarm source

− After setting the alarm time(s), select the desired alarm source using the alarm
mode switch (at the back):
Radio position: You are awakened by the last radio station you listened to.
Buzzer position: You are awakened by a buzzer.
If you are already listening to the radio at the alarm time, the buzzer will
always sound regardless of the position of the alarm mode switch.

Being awakened

At the set time, you will be woken by the selected alarm source (buzzer or radio), with
the alarm signal becoming more intense.
Interrupting the alarm for 24 hours
− Buzzer alarm source: Press any button (except
24 hours, the alarm will be triggered again.
− Radio alarm source: Press and hold the RESET button to stop the alarm and turn
off the radio. After 24 hours, the alarm will be triggered again.
Auto-stop function
− If you have selected buzzer as the alarm source, the alarm switches off
automatically after approx. 1 minute if you do not press a button. After 24 hours,
the alarm will be triggered again.
− Radio alarm source: You must turn off the radio manually (press and hold the
RESET button).
Repeat alarm (snooze function)
− Press the
The alarm signal stops and the alarm symbol
According to the setting you made for the snooze time, the device will switch on again
and wake you up again (default setting = 5 minutes).
This procedure can be repeated multiple times.
Turning the alarm off completely
− Slide the 1 or
function.
DCF Radio Alarm Clock CK 1708 | CK 1709
button once when the alarm signal sounds.
2 switch to off to completely turn off the respective alarm
) to stop the alarm. After
or flashes in the display.
Alarm
33