> This screen shows the:
■ current chlorine output setting (ie 100% shown);
■ current time setting;
■ current power status (ie ON shown).
TYPICAL (EVERYDAY) START-UP
Note: Once the unit starts there is a short time delay until the cell operates to ensure the filtration
system is primed with water.
• Every time the EcoSalt2 is turned on, the following screen is shown on start-up:
• The display then automatically reverts to the HOME screen:
> This screen shows the:
■ current chlorine output setting (ie 100% shown);
■ current time setting;
■ current power status (ie ON shown).
100% – 09:29 AM
ON
DAVEY
V1.2.1 EU 15L
100% – 09:29 AM
ON
12