Davey EcoSalt 2 DES2-15E Manual Del Usuario página 17

> Press menu/setting select once your preferred BOOST MODE is displayed;
> This will then take you back to the first setting menu;
> If the EcoSalt2 is left untouched for ~ 30 seconds, or the
pushed, the display reverts to the HOME screen.
> The HOME screen will continue to show the cell duty cycle percentage, however the reference to "ON" has
been notably replaced by the reference to "BOOST". This will remain for the 24 hour period;
> It is possible to alter the cell duty cycle during a 24-hour boost and the display percentage on the HOME
screen changes as expected. This could be handy if the setting needs altering for the next day, once the
BOOST MODE is finished;
> It should be noted though, BOOST MODE overrides every other setting. During the 24 hour period while
is BOOST MODE is active, the cell current is 100% output, and duty cycle is overridden to 100%. This is
regardless of the display on the screen.
ACTIVATING SPA MODE
The EcoSalt2 system is compatible with large swimming pool applications as well as much smaller spa
applications. Turning on the SPA MODE reduces the cell duty cycle by 80% of its current setting.
For example:
• If the EcoSalt2 is on for 10 hours per day, the CHLORINE OUTPUT is set to 50%, but the SPA MODE is
on: the EcoSalt2 cell duty cycle is only 1 hour, of that day;
• If the EcoSalt2 is on for 10 hours per day, the CHLORINE OUTPUT is set to 25%, but the spa MODE is
on: the EcoSalt2 cell duty cycle is only 30 minutes, of that day.
2. BOOST
ON
menu/setting cancel (go back) button is
50% – 09:40 AM
BOOST
17