Carson Race Shark FD Indicaciones De Seguridad página 15

READY TO START
1. First switch on the transmitter (LED blinks).
2. Now connect the battery to the controller connector in the
boat. (see 5 "Inserting the Battery")
Important: The boat is not yet ready for use!!
3. Now place the boat in the water.
- the status LED on the boat flashes twice and then remains lit,
- the status LED on the remote control goes out.
The model boat is now ready to go (safety circuit!!! the model only
works when in the water).
STEERING YOUR MODEL
CAUTION
To avoid loss of control: ALWAYS move the controls S-L-O-W-L-Y!
Attention!! The model has no reverse function.
1. Forward
2. Left
3. Right
1
OFF
ON
15 // GB