Surfacesmoothing
1. Buff the surface of the nail with
your own nail buffer (nail file).
Clean
Cleaningthemainbody(Fig.6)
Wipe with a dry cloth after use.
• Make sure the power switch is in the "0" position.
ES-WC30_AM.indb
13
• If gel remover adheres to the appliance, dissolve a
little hard soap in water and immerse a cloth,
squeeze out well and wipe the appliance clean.
Cleaningtheattachments
Gelsandingattachment(Fig.7)
Remove the filings using a make‑up brush with soft
bristles.
Gelnailpolishremover&cuticlecare
attachment(Fig.8)
Wipe with a dry cloth.
13
2013/07/09
14:23:57