Spdif Output; Setting The Time; Setup Menu - Samsung 7+ Serie Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Preferred Language
(digital channels only)
Digital-TV broadcasts are capable of simultaneous
transmission of many audio tracks (for example,
simultaneous translations of the program into foreign
languages).
You can only select a language among the ones being
broadcasted.
Multi-Track Sound (MTS)
(analog channels only)
■ Mono: Choose for channels that are broadcasting in
mono or if you are having dificulty receiving a stereo
signal.
■ Stereo: Choose for channels that are broadcasting in
stereo.
■ SAP: Choose to listen to the Separate Audio Program,
which is usually a foreign-language translation.
Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAP.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
■ Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Speaker Select (External Speaker / TV
Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
When Speaker Select is set to External Speaker, the
volume and
MUTE
buttons will not operate and the
sound settings will be limited.
When Speaker Select is set to External Speaker.
x
TV Speaker: Off, External Speaker: On
When Speaker Select is set to TV Speaker.
x
TV Speaker: On, External Speaker: On
If there is no video signal, both speakers will be mute.

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
■ Audio Format: During the reception of a digital TV
■ Audio Delay: Correct audio-video sync problems, when
t
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
¦
O
Time
■ Clock: Setting the clock is for using various timer
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).

Setup Menu

Setting the Time

MENUm → Setup → Time → ENTERE
features of the TV.
O
The current time will appear every time you press
the
INFO
button.
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
– Auto: Set the current time automatically using the
time from a digital channel.
The antenna must be connected in order to set
the time automatically.
– Manual: Set the current time manually.
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute and
am/pm manually.
Available only when Clock Mode is set to
Manual.
You can set the Month, Day, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
23
English

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

7000 seriePn50c7000Pn58c7000Pn63c70008000 serie

Tabla de contenido