Spdif Output - Samsung 450 4+ Serie Manual Del Usuario

Dialog Clarity (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can
be heard more clearly.
Preferred Language
(digital channels only)
Digital-TV broadcasts are capable of
simultaneous transmission of many audio
tracks (for example, simultaneous translations
of the program into foreign languages).
✎
Not available in some locations.
✎
You can only select a language among the ones being
broadcasted.
Multi-Track Sound (MTS)
■ Mono: Choose for channels that are
broadcasting in mono or if you are having
difficulty receiving a stereo signal.
■ Stereo: Choose for channels that are
broadcasting in stereo.
■ SAP: Choose to listen to the Separate
Audio Program, which is usually a
foreign-language translation.
✎
Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAP.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
■ Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Speaker Select (External Speaker /
TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎
When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
✎
When Speaker Select is set to External Speaker
x
TV Speaker: Off , External Speaker: On
✎
When Speaker Select is set to TV Speaker
x
TV Speaker: On , External Speaker: On
✎
If there is no video signal, both speakers will be mute.

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
■ Audio Format: During the reception of a digital TV
■ Audio Delay: Correct audio-video sync problems, when
MTS
FM Transmitter
(Not available in some locations)
You can listen to TV sound from FM receiver speaker by
transmitting audio signals by FM frequencies.
✎
t
MTS
Connecting a FM Transmitter
Insert FM Transmitter Module into the Socket which is
located at the back side of TV.
■ FM Transmitter (Off / On): Turns FM transmitter on/off.
■ FM Frequency: Sets FM transmitter frequency.
Sound Reset (OK / Cancel)
Restore all sound settings to the factory defaults.
¦
O
Time
■ Time: Setting the clock is for using various timer features
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM, or Dolby Digital.
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
For more detailed information, refer to "FM Transmitter
Setup" (p. 31).
TV Side Panel
FM Transmitter
Setup Menu
Setting the Time
MENUm → Setup → Time → ENTERE
of the TV.
O
The current time will appear every time you press
the INFO button.
17
English