Connection Of The Audio Source; Requirements Of The Source Devices - Teuco 641 HA Manual Del Usuario

EN
CONNECTION OF THE AUDIO SOURCE (BLUETOOTH
Follow these steps to carry out the Bluetooth
audio connection between the amplifier and an
audio source equipped with a Bluetooth
transmission signal:
• Switch on the amplifier (with the loudspeakers
connected) .
• Switch on the source device and activate the
Bluetooth function .
®
• If a connection confirmation is requested, digit
the pairing code: 0000 .
• Play an audio track via the player of the source
device .
in the case of source devices such as mobile
p h o n e s , i t i s n e c e s s a r y t o c a r r y o u t t h e
synchronisation of the Bluetooth
the device research function .
For further information, refer to the instruction
manual of your telephone .

REqUIREMENTS OF THE SOURCE DEVICES

To function correctly with the amplifier, the source
device must have the following characteristics:
• Communication protocol: Bluetooth
previous .
• Profiles: A2DP, AVRCP.
• Band frequency: 2.4 GHz.
• Range: Class 2 - 10m.
• Audio volume control.
20
®
A2Dp
®
devices utilising
®
2 .1 or
®
)
®
®
hi-fi
641 HA