Delivery Scope; Intended Use; Technical Data - Bosch GST 90 E Professional Manual Original

OBJ_BUCH-1231-002.book Page 11 Friday, June 22, 2012 12:33 PM
Symbol Meaning
Read all safety warnings and all
instructions
Before any work on the machine
itself, pull the mains plug from the
socket outlet
Wear protective gloves
Additional information
Movement direction
Reaction direction
Next step of action
Sawdust blower device
Extraction
Mitre/Bevel Angle
Low stroke rate/speed
High stroke rate/speed
Switching On
Switching Off
On/Off switch lock-on
Prohibited action
Correct result
Saw with moderate pressure in
order to achieve optimal and precise
cutting results.
Bosch Power Tools
Symbol Meaning
When sawing metal, apply coolant/
lubricant alongside the cutting line
Article number (10-digit)
P Rated power input
1
n Stroke rate at no-load
0
Cutting depth, max.
Wood
Aluminium
Metal
Particle board
Weight according to
EPTA-Procedure 01/2003
/II Symbol for protection class II
(completely insulated)
L Sound pressure level
pA
L Sound power level
wA
K Uncertainty
a Vibration total value
h

Delivery Scope

Jigsaw.
Splinter guard, parallel guide, application tools and other
accessories shown or described are not part of the standard
delivery scope.
A complete overview of accessories can be found in our
accessories program.

Intended Use

The machine is intended for making separating cuts and cut-
outs in wood, plastic, metal, ceramic plates and rubber while
resting firmly on the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw blade recom-
mendations are to be observed.

Technical Data

The technical data of the machine are listed in the table on
page 166.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries,
these values can vary.
English | 11
1 619 P08 843 | (22.6.12)