D.A.S. DSP-26 Manual De Usuario página 32

OPERATION
channels are linked and a Step parameters is changed, e.g. High pass slope type, both channel values
will be forced to the same value.
parameters don't have discrete selections, instead they have a range of numerical values such
Offset
as gain, frequency or delay. These parameters can have offsets between them when the channels are
linked. If any linked parameter reaches the value limit, none of the linked parameters will be able to
move further in that direction.
Table 1 Linked parameter relationships
Parameter
Input Delay
Input EQ Type
Input EQ Frequency
Input EQ +/-
Output Name
Output Source
Output Gain
Output Limit
Output Delay
Output Delay Link
Output Polarity
Output Lo Shape
Output Lo Frequency
Output Hi Shape
Output Hi Frequency
Output EQ Type
Output EQ Frequency
Output EQ +/-
Output EQ Width
28
Linking Type 2 Channel 3 Way
Offset
Step
Offset
Offset
Offset
Offset A(1, 3&5) / B(2, 4&6)
Offset
Offset
Offset 1-3, 3-5, 2-4, 4-6
Offset 1-3, 3-5, 2-4, 4-6
Step
Step
Offset
Step
Offset
Step
Offset
Offset
Offset
Manual del usuario/ User´s manual
A-B
A-B
A-B
A-B
1-2, 3-4, 5-6
1-2, 3-4, 5-6
1-2, 3-4, 5-6
1-2, 3-4, 5-6
1-2, 3-4, 5-6
1-2, 3-4, 5-6
1-2, 3-4, 5-6
1-2, 3-4, 5-6
1-2, 3-4, 5-6
1-2, 3-4, 5-6
1-2, 3-4, 5-6
1-2, 3-4, 5-6
LCR 2 Way
A-B
A-B
A-B
A-B
1-3, 4-6
A(1&4) / B(2&6) / A+B(3&5)
1-3, 4-6
1-3, 4-6
1-4, 2-5, 3-6
1-4, 2-5, 3-6
1-3, 4-6
1-3, 4-6
1-3, 4-6
1-3, 4-6
1-3, 4-6
1-3, 4-6
1-3, 4-6
1-3, 4-6
1-3, 4-6
DSP-26