D.A.S. DSP-26 Manual De Usuario página 33

4. Crossover Mode
This Utility allows the crossover slopes of the associated bands to be linked together for ease of setting.
For example, when in 'Both' mode changing the frequency of the Hi slope of an output channel set up
as say 'low' band will also change the frequency of the Lo slope in the adjacent 'Mid' band output
channel. The bands do not necessarily need to actually crossover at the same frequency as an offset
can be maintained between them.
Edge' mode keeps all the crossover slopes separately adjustable. This mode is useful in initial system
set up to tune a driver/cabinet's individual response.
5. Delay Units
When you open the power supply, pressing the
screen .
Delay units can be changed for the specific application to display in:
Milliseconds(ms)
Frames per second(24,25&40fps)
Feet/inches(ft 'ins' )
Meters(ms)
Use the and button or rotary encoder to select the preferred measurement units.
Returning to the delay parameter will then allow the delay value to be viewed and adjusted in the
selected units.
DSP-26
SETUP
XOVER MODE BOTH
L
Both
Edge
L
SETUP
XOVER MODE BOTH
SETUP
DELAY UNITS
Manual del usuario/ User´s manual
L
M
L
M
*
PREV/NEXT
button, you will select the Delay Units
ms
OPERATION
M
M
29