General Maintenance - QEP WISHBONE Manual De Operación

PARTS LIST
1 Support Frame
2 Tail
3 Bolt
4 Flate Washer
5 Nut
6 Spring Washer
7 Bolt
8 Spring Washer
9 Flate Washer
10 Rubber Foot
11 Base
12 Big Pad

GENERAL MAINTENANCE

1. Oil should not be used on the 10420Q QEP Tile Cutter. Use of oil will cause
eventual gumming and sticking of the movable parts as the oil combines with
dirt and ceramic tile dust.
2. Wear is normal in the chrome plated rails and can be evenly distributed by
occasional rotation of each of the two rails. For cutters with hex bolts holding
the rails, loosen each hex bolt and slightly rotate the rails. Retighten the hex
bolts when finished.
3. The only part routinely needing replacement is the carbide scoring wheel.
All other parts are also available.
13 Flate Washer
14 Spring Washer
15 Nut
16 Flate Washer
17 Spring Washer
18 Nut
19 Head
20 Bolt
21 Ruler
22 Flate Washer
23 Plastic Screw
24 Bolt
25 Bolt
- 4 -
26 Plastic Screw
27 Ring
28 Bearing Cap
29 Sliding house
30 Axis Fixer
31 Bolt
32 Flate Washer
33 Spring Washer
34 Bearing
35 Breaker
36 Small Magnet
37 Bolt
38 Steel Plate
39 Wishbone Bbar
40 Cutting Blade
41 Bolt
42 Bolt
43 Handle
44 Guard Rod