Troubleshooting - essentiel b ELS814-1b Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

troubleshooting

If your machine requires repair and you are unable to solve the problem with the infor-
mation provided below, you should:
• Unplug the machine from the mains supply.
• Turn off the water supply.
Contact your retailer's after-sales service centre.
Problems
The machine won't start.
The machine does not
The machine is vibrating.
100
The Start/Pause button has
The programme selector
switch is in the off position
The machine door is not
drain.
The drain pump filter is
The feet have not been
The clamping screws have
The drum contains only a
small amount of laundry.
The machine is overloaded
with laundry or the laundry
is not evenly distributed.
The washing machine is
in contact with another
appliance or any other
Possible causes
It's not plugged in.
The fuse is blown.
Mains power is off.
not been pressed.
(deactivated).
closed properly.
The drain hose is
obstructed or bent.
clogged.
adjusted.
not been removed.
object.
Solutions
Insert the plug into the socket.
Replace the fuse.
Check the power supply.
Press the Start/Pause button.
Set the programme selector
switch to a programme.
Close the machine door.
Check drain hose.
Clean the drain pump filter.
Adjust the feet.
Remove the clamping screws
mounted on the machine.
This will not interfere with the
operation of the machine.
Do not overload the machine.
Make sure that the laundry is
evenly distributed.
Make sure that there is enough
clearance around the unit so that
it does not come into contact with
an object, wall or furniture.

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Els712-2b

Tabla de contenido