General Information; Symbols And Their Meaning; Safety Instructions - Schneider Airsystems KTP 310 DR Manual De Instrucciones

GB
KTP / SIP
Table of contents - Part 2
2.1 General information ..................
2.2 Symbols and their meaning ........
2.3 Safety instructions ....................
2.4 Commissioning .........................
2.5 Maintenance.............................
2.6 Decommissioning ......................
2.7 Warranty .................................
2.8 Troubleshooting ........................

2.1 General information

Observe the safety instructions!
Read the Instruction Manual Part 1 and 2!
Subject to technical modifications. Figures
(at the start of the Instruction Manual) may
vary from the original.
Usable energy: only cleaned compressed air
that is free of condensate and oil.
Recommendation: have our service partners
perform any repair and maintenance work
(see last page).

2.2 Symbols and their meaning

Read the Instruction Manual
Warning against dangers
Wear eye protection!
Wear a respirator mask!
Oil the device!
Explosion hazard!
Tripping hazard!
Service addresses

2.3 Safety instructions

DANGER
Explosion hazard!
Do not work in potentially explosive areas!
Observe maximum pressure!
Use compressed air for energy only.
II/4
4
WARNING
4
Uncontrolled movement of compressed
4
air hose when quick-action coupling is
opened!
5
Hold the compressed air hose tightly!
5
5
5
WARNING
6
Silicone cartridge or silicone puppet can
shoot out.
Work with union ring only!
WARNING
Hazardous substances can be released
during processing.
Ventilate rooms well!
Wear a respirator mask if necessary!
WARNING
Dispersion of dust, fluids, dirt particles
during operation.
Wear safety glasses!
CAUTION
Dangerous obstacle!
Air hoses laid on the ground.
Avoid or pay close attention.
• Protect yourself and other persons, ani-
mals, property, and the environment by
taking the necessary protective measures
and being trained in use of the devices to
prevent harm to your health, property
damage, financial
harm or risk of accident.
• Be calm and focused and ensure proper
operation.
• Repairs may be carried out only by
Schneider Druckluft GmbH or its approved
service partners.
• Prohibited: manipulation, inappropriate
use, temporary repairs, use of other ener-
gy sources, removal or use of damaged
safety equipment, operating a leaking or
loss, environmental