How To Use; Voltage Measurement - Steren MUL-005 Manual De Instrucciones

HOW TO USE

Voltage measurement

1.- Connect the red test tip to "VΩmA" connector and the black tip
to "COM" connector.
2.- Set the desired range selector for V - - - if you measure DC
voltage or V ~ if you measure AC voltage.
If the voltage is unknown, set the selector to the highest possible
range on the scale, and reduce the range until the reading
obtained is satisfactory.
3.- Connect the test tips to device or circuit to start the measure.
4.- Turn on the device what uo want to measure. The voltage value
will appear on the digital display, with its respective polarity.
V - - - V~
17