Radio Functions - Clatronic AR 815 USB/CR Manual De Instrucciones

Ocultar thumbs Ver también para AR 815 USB/CR:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
NOTE
If no information is available
NO CLOCK or NO PTY is
displayed.
Setting the time manually
If the time should not be set automatically, proceed as follows:
DSP (10) for a short while until the time ap-
Press the button
pears on the display.
Now keep the button
DSP pressed until the minutes flash.
Turn the multi-controller (3) to make the setting.
DSP for a short while. The hours start
Press the button
flashing.
Turn the multi-controller (3) to make the setting.
Reset Radio
To reset the unit to default settings press RESET (4) with a pointed
object, i.e. pen.
Reset the unit when:
using it the first time after all cabling is done,
malfunctions of buttons occur,
error messages are displayed.

Radio Functions

Set RADIO Mode
MODE (21) until frequency and band are
Repeatedly press
displayed.
Select Frequency Band
Press
BND/LOU/ENT (7) to toggle between FM1, FM2, FM3
and AM. The selected frequency band is displayed.
All manuals and user guides at all-guides.com
Auto Search
Manual Search
After two seconds idling the unit returns to auto search. The display
shows AUTO.
Save Station
For each frequency band 6 station presets are available.
Access Saved Station
Auto Save
Cycle Through Saved Stations
(27) to start auto search, SEARCH
Press
(26) or
is displayed. Search stops if a station is found.
Press and hold
(26) or
displayed.
Press
(26) or
(27) to step through the FM
frequency band in steps of 0.05 MHz and 9 kHz for AM until
the desired frequency is displayed.
Press and hold the desired numeric button (17) approx. 2
seconds to save the current station. A beep can be heard after
successful storage (except setting to BEEP OFF).
BND/LOU/ENT (7) to select the desired frequency
Press
band.
Press one of the numeric buttons (17) to access the respective
station.
BND/LOU/ENT (7) to select the desired frequency
Press
band.
Press and hold
AS/PS/D-AUD (22). SEARCH is displayed.
The unit starts automatic search. With search, the first 18 sta-
tions are checked. The respective preset flashes.
Press one of the numeric buttons (17) to access the respective
station.
Press
AS/PS/D-AUD (22). All stations are briefly played in
sequence.
Press
AS/PS/D-AUD (22) when the desired station comes
up. This station stays tuned into.
(27) until MANUAL is
73

Publicidad

Tabla de contenido
loading

Tabla de contenido