bora UUE 1 Manual De Instrucciones Y Montaje página 10

Function
The air recirculation variant is a good idea when the exhaust air variant cannot be realised due to structural or
energetic reasons, such as a low energy house. It is here where the extracted cooking vapours are transported in
a recirculation unit, cleaned via the activated carbon mat and then released again. In this system, the
effectiveness of the cleaning is lower than that of exhaust air conductance to the outside.
Planning
To be able to install and use the BORA air recirculating unit ideally, some basic things must already be taken into
consideration in the planning phase.
Position of the air recirculation unit:
The air recirculation unit can be placed in various positions in the kitchen or adjoining rooms. The position of the
air recirculation unit and its respective fan component should already be determined during the planning phase.
Installation examples:
Example 1:
- The base fan lies in the base area of
the kitchen.
- The recirculation unit is connected
directly to the fan and is located
underneath a kitchen cupboard.
- Maintenance work is performed over
the base area.
GB
GB
10