Configuration Using Thomview Software - THOMSON DSC 923W Manual De Configuración

D - CONFIGURATION AND USE
2 - CONFIGURATION USING THOMVIEW
SOFTWARE
The ThomView software is compatible with PC and
Mac OS and configures and manages one or more
cameras connected to the same local network. On
another network, it enables remote access to the
camera image.
The ThomView software is provided on the CD that
comes with the product, and is also available for
download on our website:
h t t p : / / w w w . t h o m s o n s e c u r i t y . e u /d o c s .
php?lang=FR&type=5&ref=512393
• Install then run the software on your computer:
The ThomView software asks you for a user name
and password to connect: the default user name is
"admin" and there is no password.
Important note: this user name and password is not
the same for your camera. They are specific to the
ThomView software and prevent shut-down of the
software by unauthorised persons, for example.
The main software window opens:
1 2 3 4 5 6
12
10
EN
u . e i t y u r e c n s s o m o t h w . w w
7 8 9 10 11
13 14
960P WIFI PTZ DOME IP CAMERA
1 Add a new camera
Software settings
2
Access to videos saved on the computer
3
Access to the operations log in the software
4
Selection of the number of cameras on the
5
screen at one time
Previous/next page. The software can manage
6
up to 64 cameras: these arrows let you switch
from cameras 5 to 8 then 9 to 12, etc.
Go to full screen
7
8
Launch a patrol (compatible cameras only)
Cut the image display for all of the cameras
9
Date, current time, processor load and hard
10
disk use
11
List of cameras saved to the software
Display frames for camera images
12
Controls available for the selected camera
13
Display of direction and zoom controls
14
(compatible cameras only)
To add your camera, click the
"Ajouter un périphérique [Add a device]" icon on the
top left:
1 2 3 4
11 12 13
5 6 7 8 9 10
14