Configuration Using Thomview Software - THOMSON DSC 725S Manual De Instrucciones

OUTDOOR 1080P IP WIFI CAMERA
Model and MAC address of the camera
2
Camera time setting
3
Camera WiFi settings (if you set up the
4
camera using a wired connection and want
to switch to a wireless connection, you can
select and configure a WiFi network here)
Movement detection settings, sound
5
detection settings (compatible cameras only)
Allows playback of videos made on the
6
micro SD card (not supplied)
Not used
7
Display micro SD card information, if
8
installed: space used, free space and
formatting
Email configuration for sending messages
9
when there is detection
Set camera volume (compatible
10
cameras only)
Embed the name and time in the camera
11
image
Activation or deactivation of camera
12
indicator lights (compatible cameras only)
Programme the lighting ranges for night
13
vision, if you do not want to use the
automatic function
Enables you to modify the username or the
14
password for camera connection.
Delete camera from your user account.
15
The list of cameras that appear when the app is
launched give you access to other settings:
1
2
3
D - CONFIGURATION AND USE
Name under which the camera is registered
1
in the app
Photo of the camera image. The icon in the
2
centre shows the live image from the camera
Add another camera to the application
3
Access to photos and videos captured
4
- Information about your ThomView user
5
account.
- Authorisation to connect by 3G/4G or WiFi
only
- Management of Push notifications camera
by camera (only for compatible models)
2 - CONFIGURATION USING THOMVIEW
SOFTWARE
The ThomView software is compatible with PC and
Mac OS and configures and manages one or more
cameras connected to the same local network. On
another network, it enables remote access to the
camera image.
ThomView software is available for downloading
from our website:
http://www.thomsonsecurity.eu/docs.
php?lang=FR&type=5&ref=512397
www.thomsonsecurity.eu
• Install then run the software on your computer:
4
The ThomView software asks you for a user name
and password to connect: the default user name is
"admin" and there is no password.
5
EN
13 EN