Dual Assignment Instructions (Long Button Press) - Axxess BX-GM4 Instrucciones De Instalación Para La Pieza

Steering wheel audio control extra settings

Dual assignment instructions (long button press)

The BX-GM4 has the capability to assign (2) functions to a single button (except
"Volume-Up" and "Volume-Down"). Follow the steps below to program the
button(s) to your liking.
Note: "Seek-Up" and "Seek-Down" come pre-programmed as "Preset-Up" and
"Preset-Down" for a long button press.
1) Turn on the ignition but do not start the vehicle.
2) Press and hold down the steering wheel control button that you want to assign
a long press function to for about 10 seconds, or until the L.E.D. flashes rapidly.
At this point release the button; the L.E.D. will then go solid.
3) Press and release the "Volume Up" button the number of times corresponding
to the new button number selected. Refer to the Dual Assignment Legend. The
L.E.D. will flash rapidly while the "Volume-Up" is being pressed, and go back
to a solid L.E.D. once released. Go to the next step once the "Volume-Up" has
been pressed the desired number of times.
Caution: If more than 10 seconds elapses between pressing "Volume-Up", this
procedure will abort, and the L.E.D. will go out.
4) To store the long press button in memory, press the button that you assigned a
long press button to (the button held down in Step 1). The L.E.D. will now go off
indicating the new information has been stored.
BX-GM4
Note: These steps must be repeated for each button you would like to assign dual
purpose feature to. To reset a button back to its default state, repeat Step 1, and
then press the "Volume Down" button. The L.E.D. will go off, and the long press
mapping for that button will be erased.
Dual assignment legend
1. Not allowed
2. Not allowed
3. Seek-Up/Next
4. Seek-Down/Prev
5. Mode/Source
6. ATT/Mute
7. Preset-Up
8. Preset-Down
9. Power
10. Band
11. Play/Enter
9
12. PTT
(not applicable in this application)
13. On-Hook
(not applicable in this application)
14. Off-Hook
(not applicable in this application)
15. Fan-Up
(not applicable in this application)
16. Fan-Down
(not applicable in this application)
17. Temp-Up
(not applicable in this application)
18. Temp-Down
(not applicable in this application)