Description Of Warning Marks - Temper KOBAN KEV-01 Instrucciones De Operación

6.Description of Warning Marks

1-High danger of electric shock is present when PE Pre-Test indicator lights while performing PE Pre-test, in this
case, further testing must be stopped immediately, ensure a sufficiently connection of your body to earth while
performing this test.
2-Terminals with low voltage output (Approx. ±12V) powered by the charging station, terminal marked with " "
is connected to PE, use for test purposes only, in the case of wrong wiring or error of the charging station, these
terminals may present a hazard.
Max.250V~/430V 3~50/60Hz
Max.10A Load CAT II 300V
CP Error "E"
PE Error
PE Pre-Test
1
13A
NC
PP State
L1
PE
L2
N
L3
PE
20A A
32A B B
D C
63A
CP State
EVSE Adapter
Test Adapter for Electric Vehicle Charging Stations
CP Signal Output
2
9