Colour Coding On The Dispensing Hoses; Maintenance - Miele professional DOS G 80 Instrucciones De Montaje

Colour coding on
the dispensing
hoses

Maintenance

Fill or replace the container, fit the siphon and secure the lid.

Feed the siphon into the container until it reaches the bottom.

Instructions for venting the dispensing system and setting the dos‐
age are given in the Operating instructions for your washer-disin‐
fector.
To differentiate between the containers when using more than one
DOS module, the hoses must be colour coded using the coloured la‐
bels supplied.
Stick the label near the siphon and one of the same colour close to

the free end of the hose to enable clear identification.
Miele use and recommend the following for DOS K 85:
– blue: for cleaning agent
– red: for neutralising agent
– green: for disinfecting agent / additional second cleaning agent
– white: for acidic process chemical agent
– yellow: for special agents in laboratory applications
Miele use and recommend the following for DOS G 80:
– blue: for cleaning agent
– yellow: for rinsing agent
The dispensing system should be serviced at the same time as the
washer-disinfector by Miele Service.
en - Installation
25