Declaration Of Conformity; Specified Use; General Safety Instructions; Special Safety Instructions - Metabo KHE 3250 Manual Original

en ENGLISH
Original instructions

1. Declaration of Conformity

We declare under our sole responsibility: These
combination hammers, identified by type and serial
number *1), comply with all relevant requirements of
the directives *2) and standards *3). Technical file
at *4) - see page 3.

2. Specified Use

With the appropriate accessories, the machine is
suitable for work with hammer drill bit and chisels in
concrete, stone and similar materials and with core
cutters in tiles and similar materials, as well as for
non-impact drilling into metal, wood etc. and for
driving screws.
The user bears sole responsibility for any damage
caused by improper use.
Generally accepted accident prevention regula-
tions and the enclosed safety information must be
observed.

3. General Safety Instructions

For your own protection and for the
protection of your power tool, pay atten-
tion to all parts of the text that are marked
with this symbol!
WARNING – Reading the operating instruc-
tions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety warn-
ings and instructions may result in electric shock,
fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Pass on your electrical tool only together with these
documents.

4. Special Safety Instructions

Wear ear protectors. Exposure to noise can cause
hearing loss.
Use the additional handle supplied with the
tool. Loss of control can cause personal injury.
Hold the power tool by insulated gripping
surfaces, when performing an operation where
the cutting accessory may contact hidden
wiring or its own cord. Cutting accessory
contacting a "live" wire may make exposed metal
parts of the electrical tool "live" and could give the
operator an electric shock.
Work only with the additional handle correctly
installed.
Always hold the machine with both hands using the
handles provided, stand securely and concentrate.
Dust from material such as paint containing lead,
some wood species, minerals and metal may be
8
harmful. Contact with or inhalation of the dust may
cause allergic reactions and/or respiratory diseases
to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic
such as oak and beech dust especially in
conjunction with additives for wood conditioning
(chromate, wood preservative). Material containing
asbestos must only be treated by specialists.
- Where the use of a dust extraction device is
possible it shall be used.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is recom-
mended.
Follow national requirements for the materials you
want to work with.
Always wear protective goggles, gloves, and sturdy
shoes when working with this tool.
Ensure that the spot where you wish to work is free
of power cables, gas lines or water pipes (e.g.
using a metal detector).
If the safety coupling responds, switch off the
machine immediately.
Do not touch the rotating tool!
Secure the workpiece against slipping, e.g. with the
help of clamping devices.
Remove chips and similar material only with the
machine at standstill.
Caution with hard screwdriving (driving of screws
with either a metric or an imperial thread into steel)!
The head of the screw may rip off or high restoring
torques may be incurred at the handle.
Pull the plug out of the plug socket before any
adjustments or servicing are performed.
Safety coupling:If the tool jams or catches, the
power supply to the motor is restricted. Due to the
strong force which can arise, always hold the
machine with both hands using the handles
provided, stand securely and concentrate.
A damaged or cracked auxiliary handle must be
replaced. Never operate a machine with a defective
additional handle.
5. Overview
See page 3.
1 Keyless chuck *
2 Keyless chuck sleeve *
3 Chuck lock*
4 Tool lock
5 SDS chuck
6 Spindle *
7 Additional handle
8 Depth stop
9 Metabo VibraTech (MVT)
10 Trigger
11 Lock
12 Switch button (for changing the operating
mode)