Aqua Marina Vibrant BT-18VI Manual De Instrucciones página 11

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Punctures less than 1/8"in size can be repaired simply without a patch. Deflate your board, then
clean and dry the area to be repaired. Apply a small drop of glue to cover the puncture, and let it
dry 12 hours.
2. Cut a piece of repair material large enough to overlap the damaged area by approximately 1.5cm
(1/2"), and round off the edges.
3. Apply glue to the under side of the patch and around the area to be repaired. Too much glue will
interfere with a proper repair.
4. Allow adhesive to become tacky for 2-4 minutes, and then starting at one corner and working
outward, carefully apply the patch to the repair area using very firm pressure. Rub the entire
patch area and the edges of the patch using very firm pressure. Allow to cure for at least 12 hours
before inflating and using.
H
Correct
How To Paddle A SUP
• Assume a comfortable stand with your feet positioned roughly shoulder width apart. Knees
slightly bent in a relaxed upright stance, shoulders back, looking straight ahead
• Paddle Grip: place your top hand on the end of handle and your bottom hand. Approximately 61cm
(24") down shaft of paddle. Paddle in a comfortable forward motion, with arms slightly bent
• To turn left concentrate paddling on the right hand side of the boards to turn right concentrate
paddling on the left hand side of the board
• It is suggest letting the paddle dry completely after using, in order to keep the paddle in good
condition.
PADDLE ASSEMBLY
Incorrect
11
Front
Front
SPORTS II B0302518
Adjustable Aluminum iSUP Paddle
DUAL-TECH B0302127P
2-in-1 iSUP & Kayak Paddle
STANDARD B0302519
Adjustable Aluminum iSUP Paddle
CARBON GUIDE B0302520
Carbon / Fiberglass iSUP Paddle
CARBON PRO B0302521
Carbon iSUP Paddle

Publicidad

Tabla de contenido
loading

Tabla de contenido