Reset Operation (Factory Set) - Perry 1TPTE011B Manual Del Usuario

11 - CONFIGURATION MENU (installer)

11.9 - RESET OPERATION (FACTORY SET)

IMPORTANT! The RESTORE (Reset) operation is
recommended for the installer or expert user. In fact, this
operation deletes many previous settings carried out also
according to the type of system.
EN
•The operation may be carried out pressing the
the path -> Set PROG ->:
confirm with OK .
The display will ask to choose between
• Use the keys, to select then press
•If you opt for NO the display exits the function and goes back to the initial
FACTORY SEt. Press the Mode
•If you confirm YES, the control deletes all previously entered settings by
restoring the factory settings (default), the thermostat enters normal
operation.
The RES T operation deletes any user and/or E
installer password entered.
46
Mode key for secs., follow 5
using keys select item FACTORY SEt
FACTORY «YES » and «NO ».
OK to confirm.
key twice to exit.
/OK
/OK
main screen
«normal operation»
or
/OK