Safety Messages To Maintenance Personnel - Federal Signal Global G-SND Manual De Instalación Y Mantenimiento

Safety Messages to Maintenance Personnel

Listed below are some important safety instructions and precautions
you should follow:
• Read and understand all instructions before operating this system.
• Repair of flamepaths is not recommended.
• If you acquired a significant quantity of units, then it is
recommended that spares are also made available.
• To avoid electrical shock hazards, do not connect wires when
power is applied. Failure to observe this warning may lead to
serious injury or death.
• Any maintenance to the sounder system must be performed by a
trained electrician who is thoroughly familiar with all applicable
national and local codes in the country of use.
• Any maintenance to the sounder system must be done with power
turned off.
• Check the sounder periodically to ensure that the effectiveness of
the device has not been reduced because it has been clogged with
a foreign substance or because objects have been placed in front
of it.
• Never alter the unit in any manner. Safety of the unit may be
affected if additional openings or other alterations are made to the
internal components or housing.
• The nameplate, which may contain cautionary or other information
of importance to maintenance personnel, should NOT be obscured
in any way. Ensure that the nameplate remains readable.
• After performing any maintenance, test the sounder system to
ensure that it is operating properly.
Failure to follow all safety precautions and instructions may result in
property damage, serious injury, or death.
Installation and Maintenance Instructions
Model G-SND Global Series Sounder
27