Federal Signal Global G-SND Manual De Instalación Y Mantenimiento página 24

Installation and Maintenance Instructions
220-240 Vac operation (no remote switching of tones)
a. Connect the line (hot) power-source wire to the position
b. Connect the neutral (common) power-source wire to the
c. Connect the ground wire to the position marked
120 Vac operation (no remote switching of tones)
a. Connect the line (hot) power-source wire to the position
b. Connect the neutral (common) power-source wire to the
c. Connect the ground wire to the position marked
24 Vdc Operation (no remote switching of tones)
a. Connect the positive (+) power-source wire to the
b. Connect the negative (
c. Connect the ground wire to the position marked
220-240 Vac operation (remote switching of tones)
a. Connect the line (hot) power-source wire to the position
b. Connect the neutral (common) power-source wire to the
24
marked on the terminal block.
L1/+
position marked
on the terminal block.
Alt01
marked on the terminal block.
L1/+
position marked
on the terminal block.
Alt01
position marked
terminal block position marked
block.
on the terminal block.
Alt01
marked on the terminal block.
L1/+
position marked
Model G-SND Global Series Sounder
on the terminal block.
L2/-
on the terminal block.
L2/-
on the terminal block.
L1/+
) power-source wire to the
–
on the terminal block.
L2/-
on the terminal
L2/-