RIB JOLLY BIG Serie Manual De Instrucciones página 25

Connect the power supply cable to the clamps provided.
CAUTION: Make the connections according to the chart below (OPEN
button with OPEN clamp, CLOSE button with CLOSE clamp and connect
the direct phase of the power supply to the COM clamp).
B = CAP =
Electrobrake
Screw the run stop cover back on.
Verify that the switch is on INS (In this phase the micro-switches do not
work and the C1 and C2 run stop cams are automatically regulated).
B
M2 M1
Capacitor
OPEN
CLOSE
KEY SELECTOR
25 25
25 25
PUSH BUTTON
POWER SUPPLY
CLOSE
OPEN
G
B
N
L