Asus RT-AC1900 DualBand Manual Del Usuario página 13

8. Your Internet and wireless settings are displayed. Click Next to continue.
9. Read the wireless network connection tutorial. When done, click Finish.
NOTES: You can assign a network name with up to 32 characters.
Connect to the wireless network
There are two ways for your wireless clients (notebook, tablet PC, smartphone
and so on) to connect to RT-AC
Connect to the wireless network manually
To connect to the wireless network manually:
1. Enable the Wi-Fi function on your wireless client to scan for available wireless
networks.
2. Select the SSID or network name that you assigned to your RT-AC
work.
3. Enter the password and click Connect.
Connect to the wireless network through WPS
RT-AC has a WPS (Wi-Fi Protected Setup) button for you to connect your
1900
wireless client to RT-AC
To connect to the wireless network through WPS:
1. Press the WPS button at the back of RT-AC
look at your RT-AC
2. Press the WPS button of your wireless client within two minutes or follow the
WPS instructions that came with the wireless client. When connecting via
WPS, the Power LED on your router blinks fast.
3. Wait until your router's Power LED turns into a solid light indicating a suc-
cessfully connection between your router and your wireless client.
's wireless network.
1900
's network without entering password.
1900
for the location of the WPS button).
1900
Refer to the section A quick
.
1900
's net-
1900
13