Technical Data; Eu Declaration Of Conformity; Statement Of Use; Product Specific Instructions - Chicago Pneumatic CP8528 Manual Del Usuario

Cordless Hammer Drill

Technical data

Tool data
Free speed (rpm)
Square drive (mm)
Stall torque (ft.lb)
Stall torque (Nm)
Working capacity (mm) / (in)
Drilling Steel
Drilling Wood
Screw wood
Battery voltage (V)
Weight (kg)
Weight (lb)
Ambient operating temperature
Ambient storage temperature
Recommended ambient charging tem-
perature
Recommended battery types
Recommended charger
Declarations
Noise and vibration
Sound pressure level (dB(A))
Sound power level (dB(A))
Uncertainty (dB(A))
Noise standard
Vibration drilling into metal (m/s²)
Vibration screwing (m/s²)
Vibration uncertainty (K) (m/s²)
Vibration standard
These declared values were obtained by laboratory type test-
ing in accordance with the stated standards and are suitable
for comparison with the declared values of other tools tested
in accordance with the same standards. These declared val-
ues are not adequate for use in risk assessments and values
measured in individual work places may be higher. The ac-
tual exposure values and risk of harm experienced by an indi-
vidual user are unique and depend upon the way the user
works, the workpiece and the workstation design, as well
upon the exposure time and the physical condition of the
user.
CP8528
0 - 1500 rpm
10
24
34
10 / 0.39
20 / 0.78
6 / 0,23
12
1.2
2.62
-18°C to 50°C
0 to 40°C
10 to 38°C
CP12XP
CP12CHA 12V
AUS
CP12CHE 12V EU
CP12CHK 12V UK
CP12CHO 12V
KOR
CP12CHU 12V US
CP8528
69
80
3
EN62841
1.1
0.4
1.5
EN62841
© Chicago Pneumatic - 8940172294
We, CHICAGO PNEUMATIC Tool Co. LLC, cannot be
held liable for the consequences of using the declared values,
instead of values reflecting the actual exposure, in an individ-
ual risk assessment in a work place situation over which we
have no control.
This tool may cause hand-arm vibration syndrome if its use
is not adequately managed. An EU guide to managing hand-
arm vibration can be found by accessing
www.pneurop.eu/index.php
lation'.
We recommend a programme of health surveillance to detect
early symptoms which may relate to noise or vibration expo-
sure, so that management procedures can be modified to help
prevent future impairment.
If this equipment is intended for fixtured applications:
The noise emission is given as a guide to the machine-
builder. Noise and vibration emission data for the com-
plete machine should be given in the instruction manual
for the machine.

EU DECLARATION OF CONFORMITY

We, CHICAGO PNEUMATIC Tool Co. LLC, 1815 Club-
house Road, Rock Hill, SC 29730, declare under our sole re-
sponsibility that the product (with name, type and serial
number, see front page) is in conformity with the following
Directive(s):
Machinery (2006/42/EC), RoHs (2011/65/EU), EMC
(2014/30/EU)
Harmonized standards applied:
EN 62841-1:2015; EN 62841-2-1:2018; EN 55014-1:2017;
EN 55014-2:2015; EN50581:2012
Authorities can request relevant technical information from:
Pascal Roussy, R&D Manager, Ets Georges Renault, 38 rue
Bobby Sands, BP10273 44818 Saint Herblain, France
Saint-Herblain,
Pascal ROUSSY
Signature of issuer
Date : 01/05/2018

Statement of use

This product is designed for drilling or tapping holes. No
other use permitted. For professional use only.

Product specific instructions

Battery
Battery packs which have not been used for some time
should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the perfor-
http://
and selecting 'Tools' then 'Legis-
9