Mounting The Product; Mounting The Product To A Module Manifold; Wall Mounting - Daikin 156077 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 133
5.2

Mounting the product

5.2.1

Mounting the product to a module manifold

MECHANICAL LOADS AND STRESS
Verify that the product is not subjected to mechanical loads and stress when
connecting the product.
If necessary, install a corrugated pipe compensator to compensate for
mechanical stress or tension.
Failure to follow these instructions can result in equipment damage.
1. Remove the insulation.
2. Screw the pump assembly to module manifold.
3. Screw the pipes of the heating circuit to the top connections (no
mechanical stress).
4. Fit the complete insulation.
5.2.2

Wall mounting

MECHANICAL LOADS AND STRESS
Verify that the product is not subjected to mechanical loads and stress when
mounting the product to the wall.
Failure to follow these instructions can result in equipment damage.
Mounting
NOTICE
NOTICE
FA PG - 06/2019 - 008.15 442 99_02 - EN
EN
18

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

156075PgdkPgmk

Tabla de contenido