9
Troubleshooting
Any malfunctions that cannot be removed by means of the measures
described in this chapter may only be repaired by the manufacturer.
Also observe the corresponding instructions of the manufacturer in the case
of malfunctions of the circulation pump or the actuator.
Problem
Noise in the system
Other malfunctions
Troubleshooting
Possible reason
Air in the system
Circulation pump not
properly adjusted
-
Repair
Vent the system
Verify correct adjust-
ment of the circulation
pump
Contact the AFRISO
service hotline
FA PG - 06/2019 - 008.15 442 99_02 - EN
EN
23