Display Modes - Oregon Scientific RM323A Manual Del Usuario

When the battery power level is low, the low battery indicator [
will light up. Replace the batteries accordingly.
CTIVATING THE BACK-LIGHT
When the unit is placed on the table, press [SNOOZE/LIGHT]
button downward to turn on the back-light for 5 seconds.

DISPLAY MODES

Press [MODE] button to display the following in sequence:
1 Current Time with Seconds
World City Name Abbreviation & Time
2) Current Time with Weekday
World City Name Abbreviation & Time
3) Calendar
World City Name Abbreviation & Time
To display the dual alarm times, press [ALARM] button.
]
ABOUT RADIO RECEPTION
This clock is designed to automatically synchronize its calen-
dar clock once it is brought within the range of the WWVB
radio signal broadcast from Ft. Collins, Colorado. When the
unit is within range, its radio-control mechanism will override
all manual settings unless auto-reception of radio signal has
been manually deactivated.
When the clock is receiving radio signal, the radio reception
icon will start to blink. A complete reception generally takes
about 2 to 10 minutes, depending on the strength of the radio
signal. When the reception is complete, the radio reception
icon will stop blinking. The strength of the reception for the
last full hour will be indicated.
For better reception, place the unit away from metal objects
and electrical appliances to minimize interference.
Should you wish to deactivate the RF controlled function, press
and hold [DOWN] button for 3 seconds. The radio reception
icon will disappear. To reactivate the RF controlled function,
press and hold [UP] button for 3 seconds again and the radio
reception icon will be re-displayed.
3