Viking MVSOC530SS Guia De Instalacion página 11

Installation Instructions for Flush Mount
WARNING
Always take caution lifting heavy products.
2. Use a minimum of 2 people to lift and install oven.
Place the oven adjacent to the cabinet opening,
see Figure 10. Plug the power supply cord into the
electrical outlet.
3. Carefully guide the oven between the mounting
brackets. Avoid pinching the cord between the oven
and the brackets.
4. Slide the oven all the way back until the oven frame
is seated against the cabinet and the mounting
brackets.
DO NOT
lift this unit
using the outer
oven frame
Lift point
on frame
Figure 10
5. Open the oven door and insert the 4 mounting bolts
supplied. Do not completely tighten. See Figure 11.
Figure 11
6. Open the drip tray door and insert the 2 shoulder
bolts supplied. See Figure 12. Do not completely
tighten.
7. Check alignment of oven then tighten the 4
8. Install Handle: Slide the handle over the studs on
Side Handle (x2)
E11
Note: Slide on shoulder bolt sleeves before mounting
Figure 12
mounting bolts in Figure 11 and the 2 shoulder bolts
in Figure 12 to secure oven.
the oven door and tighten the set screws using the
provided allen wrench.
Note: the set screws on the handle should be facing
down during installation. See Figure 13.
Figure 13