TAB
TAB
R
EFERENCE
System maintenance
Changing the remote control batteries is the only
regular maintenance required.
However, switches inside the remote battery case can
be changed. Similar changes may be required for any
additional remotes purchased for use in other rooms.
For further information on switch settings refer to
Not e:
"Changing remote control switch settings" on page 51.
Replacing the remote control batteries
Replace all four batteries when the remote control
stops operating or its range seems reduced. Alkaline
batteries are recommended.
1. Slide open the battery compartment on the back of
the remote (Figure 17).
2. Insert four AAA or IEC-LR3 1.5V batteries, or the
equivalent, as shown. Match the + and – symbols
on the batteries with the + and – markings inside
the compartment.
50
TAB 6Italiano
TAB 5
TAB 4
TAB 3
3. Slide the battery compartment cover back into
place.
Fi gu re 1 7 Installing the remote control batteries
AAA batteries (4)
Battery
compartment
cover
TAB 2
English
Battery
compartment