Ideal 480 Serie Manual De Instrucciones página 10

(4) Peak Hold (for 61-486 only) : Specified accuracy
±150d.
(5) Resistance
Range Resolution
600.0Ω 0.1Ω
6.000KΩ 0.001KΩ
60.00KΩ 0.01KΩ
600.0KΩ 0.1KΩ
6.000MΩ 0.001mΩ
40.00MΩ* 0.01MΩ
Input Protection : 1000VDC or 1000VAC rms
Max. Open Circuit Voltage :
Approx. 2.5V for 600Ω & 6kΩ Range.
Approx. 0.6V for others.
Max. Test Current : Approx. 0.1mA.
(6) Continuity Check
Range Resolution
600.0Ω 0.1Ω
Input Protection : 1000VDC or 1000VAC rms
Max. Open Circuit Voltage : Approx. 2.5V
Max. Test Current : Approx. 0.1mA
Continuity Threshold : <30Ω Beep On.
>100Ω Beep OFF.
Continuity Indicator : 2.7KHz Tone Buzzer
(7) Diode Test
Range Resolution
2.000V 1mV
Input Protection : 1000VDC or 1000VAC rms
Max. Open Circuit Voltage : Approx. 2.5V
Max.Test Current : Approx. 0.4mA
Accuracy
± (0.08% + 5d)
± (0.08% + 2d)
± (1.0% + 5d)
Accuracy
± (0.8% + 5d)
Accuracy
± (1.5% + 2d)
19
(8) Capacitance
Range Resolution
1.000μF 0.001μF
10.00μF 0.01μF
100.0μF 0.1μF
1.000mF 0.001mF
10.00mF 0.01mF
Input Protection : 1000VDC or 1000VAC rms
Max. Measuring Time : 0.7 sec for 1nF~1mF
3 sec for 1mF~10mF
(9) Frequency Counter
Range Resolution
100.00 Hz 0.1 Hz
1000.0 Hz 0.1 Hz
10.000 KHz 0.001 KHz
100.00 KHz 0.01 KHz
Input Protection : 1000VDC or 1000VAC rms
Min. Frequency : 1Hz
Sensitivity : > 5.0Vp-p (for ACV 1HZ ~ 10kHz).
> 10Vp-p (for ACV 10kHZ ~ 100kHz)
> 2mAp-p (for ACmA)
> 0.2Ap-p (for ACA)
(10) Temperature (For 61-486 only)
Range Resolution
-40.0°C ~ 400°C 0.1°C
-40.0°F ~ 752°F 0.1°F
Input Protection : 1000VDC or 1000VAC rms
* Does not include accuracy of the thermocouple probe.
* Accuracy specification assumes surrounding temperature
stable to ± 1°C. For surrounding temperature changes of
± 5°C, rated accuracy applies after 2 hours.
Note : The AC+DC True RMS value might be over the
selected range since the AC signal may add on the DC level.
Accuracy
± (1.2% +2d)
Accuracy
± (0.1% +2d)
Accuracy*
± (1.0% + 10d)
± (1.0% + 18d)
20