Ideal 480 Serie Manual De Instrucciones página 2

• Use appropriate personal protective equipment such as face
shields, insulating gloves, insulating boots, and/or insulating mats.
• Before each use:
- Perform a continuity test by touching the test leads together to
verify the functionality of the battery and test leads.
- Use the 3 Point Safety Method. (1) Verify meter operation by
measuring a known voltage. (2) Apply meter to circuit under
test. (3) Return to the known live voltage again to ensure
proper operation.
• Always work with a partner.
Symbols as marked on the meter and instruction manual
Risk of Danger. Important Information. See Manual.
Hazardous voltage.
~
Application around and removal from Hazardous Live
conductors is permitted.
AC (Alternating Current)
DC (Direct Current)
Earth Ground
Measurement Category II applies to test and measuring cir-
CAT II
cuits connected directly to utilization points (socket outlets
and similar points) of the low-voltage MAINS installation
Measurement Category III applies to measuring circuits
CAT III connected to the distribution part of the building's low-
voltage MAINS installation
Measurement Category IV applies to test and measuring
CAT IV circuits connected at the source of the building's low-
voltage MAINS installation
Unsafe Voltage
To alert you to the presence of a potentially hazardous
voltage, when the Tester detects a voltage ≥ 30 V or a
voltage overload (OL) in V, mV. The "
displayed and High voltage indicator is activated.
" symbol is
3 3
Meter Description
Front Panel Illustration
1. LCD display : 6000 counts
2. Push-buttons.
3. Rotary switch to turn the Power On / Off and select the
function.
4. Input Terminal for A.
5. Input Terminal for V,Ω,
6. Common (Ground reference) Input Terminal.
7. Input Terminal for mA.
Press 2 Sec
PEAK HOLD
Range Volt Sense Min Max
ac+dc
ac+dc
mV
V
Hz
V
OFF
Auto
V
LoZ
A
TRUE RMS
mA COM
MAX
MAX 600mA
600V CAT IV
10A FUSED 1000V CAT III
FUSED
61-486
, Hz, °C/F° functions.
1 Display
Smart
2 Buttons
HOLD
ac+dc
mA
ac+dc
A Hz
3 Rotary
Switch
V
4 A Input
5 V, Ω,
,
C°/F°
Input
6 Common
Input
7 mA Input
4