Before You Start; Sort And Load; Functional Prerequisite; Lint Filter - Samsung DVE52M775 Serie Manual De Usuario

Before you start

Here are a few things you should know before starting your dryer.

Sort and load

• Put one wash load in the dryer at a
time.
• Do not mix heavy and lightweight items
together.
• To improve drying efficiency for one or
two items, add a dry towel to the load.
• For best results, untangle items before
inserting them into the dryer.

Functional prerequisite

Lint filter

30 English
DV7750M-03170Y-01_EN.indd 30
• Overloading reduces the tumbling
performance, resulting in uneven
drying and wrinkling.
• Unless recommended on the care label,
do not dry woolens or fiberglass items.
• Avoid drying unwashed items.
• Do not dry items soiled with oil, alcohol,
gasoline, etc.
To prevent a risk of fire, make sure to
clean the lint filter before or after every
load.
1. Turn off the dryer.
2. Open the door, and pull out the lint
filter (A) from inside the tumbler.
3. Remove the lint that has accumulated,
and then clean the lint filter.
4. Reinsert the lint filter, and then close
the door.
CAUTION
A
• Do not operate the dryer without the
lint filter in place.
• Do not use a damaged or broken lint
filter. This may reduce performance
and/or cause fire.
2017-03-15 11:49:36