Black+Decker BDH1715SM Manual De Instrucciones página 3

• Do not use on wax polished floors.
• Do not use on any unsealed hard floor
surfaces. Additionally, on surfaces that have
been treated with wax or some no-wax floors,
the sheen may be removed by the heat and
steam action. It is always recommended
to test an isolated area of the surface to
be cleaned before proceeding. We also
recommend that you check the use and care
instructions from the floor manufacturer.
• Never put de-scaling, aromatic, alcoholic
or detergent products into the steam
mop, as this may damage it or make it
unsafe for use.
• If the circuit breaker activates while using
the steam function, discontinue product
use immediately and contact the customer
support center. (Beware of the risk of
electrical shock.)
• The appliance emits very hot steam to
sanitize the area of use. This means that
the steam head and cleaning pads get
very hot during use.
• Always wear suitable shoes when using
your steam mop and when changing the
accessories on your steam mop. Do not
wear slippers or open-toed footwear.
• Steam may escape from the appliance
during use.
• Care should be taken when using this
appliance. DO NOT touch any parts
which may become hot during use.
AFTER USE
• Unplug the appliance and allow to cool
down on before cleaning or storing it.
• When not in use, the appliance should be
stored in a dry place. Do not store with
wet pad.
• Children should not have access to
stored appliances.
INSPECTION AND REPAIRS
• Unplug the appliance and allow to
cool down before performing any
maintenance or repairs.
• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may affect
its operation.
• Regularly check the power cord for
damage.
• Do not use the appliance if any part is
damaged or defective.
• Have any damaged or defective parts
repaired or replaced by an authorized
repair agent.
• Never attempt to remove or replace any parts
other than those specified in this manual.
SEE PAGE 9 FOR OPERATION
SAFETY OF OTHERS
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they are supervised or have been
given instruction concerning the use of
the appliance by a person responsible for
their safety.
• Children should be supervised to ensure
that they do not play with the appliance.
RESIDUAL RISKS
Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings. These
risks can arise from misuse, prolonged
use, etc.
Even with the application of the relevant
safety regulations and the implementation
of safety devices, certain residual risks
can not be avoided. These include:
• Injuries caused by touching any moving
parts.
• Injuries caused by touching any hot parts.
• Injuries caused when changing any parts
or accessories.
• Injuries caused by prolonged use of the
appliance. When using any appliance
for prolonged periods ensure you take
regular breaks.
Symbols
• The label on your tool may include the
following symbols. The symbols and their
definitions are as follows:
V ..................volts
A ..................amperes
Hz ................hertz
W .................watts
min ..............minutes
or AC ......alternating current
................earthing terminal
...............safety alert symbol
................Class I Construction
(grounded)
................Class II Construction
(double insulated)
3