Hot Surfaces; Intended Purpose; Foreseeable Misuse; Safety Information - Silvercrest SIKP 2000 B1 Instrucciones De Servicio

__RP90248_B5.book Seite 33 Montag, 4. März 2013 9:01 09
Thank you for your trust!
Congratulations on your new induction hot
plate.
For a safe handling of the device and in or-
der to get to know the entire scope of fea-
tures:
• Thoroughly read these operat-
ing instructions prior to initial
commissioning.
• Above all, observe the safety in-
structions!
• The device should only be used
as described in these operating
instructions.
• Keep these operating instruc-
tions for reference.
• If you pass the device on to
someone else, please include
these operating instructions.
We hope you enjoy your new induction hot
plate!
Symbols on your appliance

Hot surfaces!

This symbol warns you about hot surfaces.
Do not touch!
This symbol warns you not to touch the sur-
face of the cooking zone|2.

2. Intended purpose

The induction hot plate is intended for heat-
ing up and keeping food warm in metal pots
and pans.
The device is designed for use in private
households. The device must only be used in-
doors.
This device must not be used for commercial
purposes.

Foreseeable misuse

DANGER! Risk of injury
through burning!
Metal objects such as knives, forks,
spoons and lids should not be left
on the cooking zone, as they could
become hot.

3. Safety information

Warnings
If necessary, the following warnings will be
used in these operating instructions:
DANGER! High risk: failure to ob-
serve this warning may result in in-
jury to life and limb.
WARNING! Moderate risk: failure to ob-
serve this warning may result in injury or se-
rious material damage.
CAUTION: low risk: failure to observe this
warning may result in minor injury or mate-
rial damage.
NOTE: circumstances and specifics that
must be observed when handling the de-
vice.
33
GB