Heated Throw; Important - Sunbeam heated bedding Manual Del Usuario

QUICK SET-UP GUIDE

Heated Throw

1 Connect the Control
STEP
Cord connector and
module securely
2 Plug Power Cord
STEP
into wall
PLEASE follow these directions in the order they are given to
ensure your product will work correctly. Do not turn on the
product until it has been fully assembled.
CAUTION:
• Always make sure cords and controls are NOT trapped or
pinched between bed slats, mattress, springs, against wall,
foot board or bed frame, or between furniture, walls or chairs.
• Do not plug main power cord into the wall
outlet until you have completely set up your
heated product per the instructions.
For questions or support, please visit www.sunbeambedding.com.
Sunbeam HeatedBedding IB_17ESM1.indd 5
Flag Tag
Control
Power
Cord
Label
Module
Throw Cord
Connector
Flag Tag
Power
Cord
Module
Throw Cord
Connector
Control Cord
Control Cord
Connector
Connector
Throw Cord

IMPORTANT

Control
Label
Throw Cord
E5
2/3/17 09:09