General Information; Target Groups; Qualification And Training Of Staff; Obligations Of The Service Personnel - Grundfos AQtap Instrucciones De Instalación Y Funcionamiento

1. General information

These installation and operating
instructions apply to both AQtap
and aqTOP, except information
given on hydraulic parts, water
connection, water tapping, which
Note
only apply to AQtap water
dispensers.
"AQtap" in this document will
include aqTOP, unless differences
are stated specifically.

1.1 Target groups

These installation and operating
instructions contain general instructions
that must be observed during installation,
startup, operation and servicing of the
product. The responsible service staff must
read these installation and operating
instructions prior to any work at the
product. These installation and operating
instructions must be available at the
installation location at all times.

1.1.1 Qualification and training of staff

The staff responsible for the installation,
startup and servicing must be trained for
these tasks. Areas of responsibility, levels
of authority and the supervision of the staff
must be precisely defined by the operating
company.
1.1.2 Obligations of the operating
company
• Observe the local safety regulations.
• Instruct the operating staff.
• Provide the stipulated safety equipment
and personal protective equipment.
• Arrange regular maintenance.
1.1.3 Obligations of the service
personnel
• Read this manual thoroughly before
putting the product into operation.
• Observe the recognised health and
safety regulations as well as the accident
prevention regulations.

1.2 Symbols used in this document

WARNING
If these safety instructions are not
observed, it may result in personal
injury.
WARNING
If these instructions are not
observed, it may lead to electric
shock with consequent risk of
serious personal injury or death.
If these safety instructions are not
observed, it may result in
Caution
malfunction or damage to the
equipment.
Notes or instructions that make the
job easier and ensure safe
Note
operation.
1.3 Safety-related symbols on the
product
Symbol Description
This is an electrical safety class
II product.
This product complies with
directive 2006/66/EU and
contains batteries which should
not be disposed of with other
household waste, but must be
collected separately.
Before obtaining access to
terminals, all supply circuits must
be disconnected.
All signs and symbols on the product must
be observed and maintained legible.
5