Troubleshooting And Replacement Parts - Smartpond 71141 Manual De Instrucciones

Step 7. Remove the nozzle and clean with
warm water.
Step 8. Remove the light ring by turning
counterclockwise and clean with warm water.
Step 9. Reassembly all parts making sure to
fasten all interior electrical cords safely. Place
the fountain into the water, and connect the
fountain into a properly grounded electrical
outlet.
Zip tie release
button
TROUBLESHOOTING
IF THE LED LIGHTS FAIL TO OPERATE:
• Check to make sure the power cord is plugged in and the lights are
getting power and the unit is getting power.
• Check to make sure you have turned on the lights using the remote.
• Check to make sure the Dawn to Dusk Sensor is covered if you would
like the lights to operate during the day.
IF THE REMOTE FAILS TO CONTROL THE LIGHT:
• Check to make sure the plastic tab has been removed from the
remote.
• The remote sensor will time-out during periods of inactivity. If your
selection is not being read, simply press the "strobe" and "fade"
buttons simultaneously before making your next section.
• Make sure to replace the 1 CR2025 battery every 6 months.
• Make sure the remote is within range of the fountain.
IF THE PUMP FAILS TO OPERATE:
• Check to make sure the power cord is plugged in, the pump is getting
power.
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO LOWE'S: 1-888-755-4497
5
7
4
6
8
9
5