Screen Configuration; Setting The Day Of The Week And Time - Mitsubishi Electric PAR-21MAA Manual De Instrucciones

3

Screen Configuration

<Screen Types>
G Function Selection of remote controller:
Set the functions and ranges available to the remote
controller (timer functions, operating restrictions, etc.)
G Set Day/Time:
Set the current day of the week or time.
G Standard Control Screens: View and set the air conditioning system's operating status
G Timer Monitor:
View the currently set timer (weekly timer, simple timer,
or Auto Off timer)
G Timer Setup:
Set the operation of any of the timers (weekly timer,
simple timer, or Auto Off timer).
Function Selection of remote controller
A
Standard Control Screens
OFF
B C
Timer Monitor
MON
TIMER
OFF
B
˚F˚C
WEEKLY
<How to change the screen>
A : Hold down both the Mode button and the Timer On/Off button for 2 seconds.
B : Press the Timer Menu button.
C : Press the Mode (Return) button.
D : Press either of the Set Time buttons (
I Use this screen to change the current day of the week and time setting.
Note:
The day and time will not appear if clock use has been disabled at Function Selection
of remote controller.
Set Day/Time
TIME SUN
D C
<How to Set the Day of the Week and Time...>
˚F˚C
˚C
ON
Timer Setup
1. Press the
SUN MON TUE WED THU FRI SAT
2. Press the Timer On/Off (Set Day) button 9 to set the day.
WEEKLY
3. Press the appropriate Set Time button A as necessary to set the time.
4. After making the appropriate settings at Steps 2 and 3, press the Filter
or ).
– 6 –
4

Setting the Day of the Week and Time

TIME SUN
˚C
˚C
TEMP. ON/OFF
2 MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK OPERATION
A
3
Day of the Week Setting
2
TIME SUN
Set Time button A to show display 2.
or
* Each press advances the day shown at 3 : Sun → Mon → ... → Fri → Sat.
* As you hold the button down, the time (at 4) will increment first in minute intervals,
then in ten-minute intervals, and then in one-hour intervals.
to lock in the values.
1
Day of the Week &
Time display
9
FILTER 4
CHECK TEST
CLEAR
4
Time Setting
button 4