Quick TMS Manual De Instalacion Y Uso página 8

GB CHARACTERISTICS AND INSTALLATION
THRUSTER MAIN SWITCH TMS
TMS can only work in a system where at least one TCD control is installed.
The TMS has been designed for connecting and disconnecting the power supply of the thrusters manufactured
by Quick ® .
Other important advantages of the TMS are:
• Universal supply (from 8 to 31 Vdc).
• Can work in a wide range of ambient temperatures.
• Easy installation.
INSTALLATION
BEFORE USING THE TMS, READ THIS INSTRUCTION MANUAL CAREFULLY.
IN CASE OF DOUBTS, CONTACT QUICK
F
In case of discordance or errors in translation between the translated version and the original text in the
Italian language, reference will be made to the Italian or English text.
F
This device was designed and constructed for use on recreational crafts.
Other forms of use are not permitted without written authorization from the company Quick
The TMS is designed and constructed for the purposes described in this instruction manual. Quick
held responsible for any direct or indirect property damage or personal injury caused by inappropriate or unin-
tended use of the command, incorrect installation or any errors that may be present in this manual.
THE WARRANTY SHALL BE VOID IF THE TMS IS TAMPERED WITH OR ALTERED BY NON AUTHORISED
PERSONNEL.
THE PACKAGE CONTAINS: thruster main switch TMS - conditions of warranty - the present manual of
installation and use.
INSTALLATION OF THE THRUSTER MAIN SWITCH
The typical installation procedure is described herein, it is not possible to describe a procedure applicable for all
situations that may be encountered.
Adapt this procedure to satisfy your own personal requirements.
Install the line switch by following the criteria below:
• Select a smooth and fl at area.
• A front access for installation and maintenance must be provided.
• Pay careful attention when drilling the panels or parts of the boat.
These holes should not weaken or break/crack the boat's structure.
The thruster main switch complies with EMC standards (electromagnetic compatibility) but requires correct
installation to avoid compromising its performance and that of the surronding instruments.
For this reason the thruster main switch must be positioned at a distance of at least:
• 50 cm away from any radio receivers.
• 1 m away from any radio transmitters (except for SSB).
• 2 m away from any radio transmitters SSB.
8
® CUSTOMER SERVICE OR YOUR LOCAL DEALER.
® .
® shall not be
TMS THRUSTER MAIN SWITCH - REV001A