Reading The System Indicators; Adjusting The Bass Level - Bose CINEMATE 1 SR Guia Del Usuario

C
ONTROLS AND

Reading the system indicators

Speaker array indicators
Power indicator:
Solid white..................................... Power on
Fast blinking white ........................ System is muted
Very fast blinking white................. System volume has reached the max or min limit
Status indicator:
Off .................................................. Speaker array and Acoustimass
Slow blinking orange .................... Speaker array is available to make a wireless connection
Fast blinking orange ..................... Speaker array is disconnected and trying to connect
Solid green .................................... ADAPTiQ
Blinking green ............................... ADAPTiQ system is calculating data
Blinking green 5 secs.................... AC power applied
Solid red ........................................ System error
Acoustimass module indicator
Status
Status indicator:
Solid orange................................... Speaker array and Acoustimass module are connected
Blinks orange every 3 secs ........... Acoustimass module is disconnected from speaker array
Slow blinking orange..................... Acoustimass module is available to make wireless connection
Solid red......................................... System error

Adjusting the bass level

The bass control knob located on the rear of the Acoustimass module allows you to
change the bass level output of the system. Turn the bass control knob clockwise to
increase the bass, counter-clockwise to decrease the bass.
6 – English
I
NDICATORS
Status
*
*
*For service use only
(or speaker array is off: Acoustimass module standby)
Power
®
system is activated
Bass control knob
® module are connected