Temperature; Timer; Keep Warm / Slow Cooking - Caso Master P1 Manual De Instrucciones

15.4.4

Temperature

15.4.5

Timer

15.4.6

Keep warm / Slow cooking

caso Master P1
Press the selection key >> (2) twice to select the temperature
mode (Indicator lamp showing temperature mode). With the
preset temperature of "120" te device turns on.
With the + / - Keys (4), you can change the settings at any
time (60, 80, 100, 120, 140, 160, 180, 200, 220 und 240°C).
Press the selection key >> (2) three times to select the
timer in power mode (Indicator lamp shows timer and power
stage).
The display shows "0". With the + / - keys (4), you can now
select the operating time in 1-minute intervals upwards (up to
max. 180 minutes) and downwards.
The preset power stage is kept.
Once the time is up, an acoustic signal sounds and the device
automatically goes into standby mode.
Or
Press the selection key >> (2) four times to select the timer
in temperature mode (Indicator lamp shows timer and
temperature stage).
The display shows "0". With the + / - keys (4), you can now
select the operating time in 1-minute intervals upwards (up to
max. 180 minutes) and downwards.
The preset temperature stage is kept.
Once the time is up, an acoustic signal sounds and the device
automatically goes into standby mode.
During timer operation, you can change the duration at any
time with the + / - keys (4). With the memory function of the
device, the power stage remain unchanged here.
During the cooking process the power level and timer can be
readjusted as you wish.
Press KeepWarm (5) to activate this function, which will maintain
a constant temperature of ca. 75°C. The timer here starts at 120
to count down. This function can be used to keep your food
warm. By pressing „KeepWarm" again for 5 seconds, this
function is terminated.
Please note
55